(Complies with BT Specifications CW1128/CW1179)

PACW/Cellular PE Insulation/PJ Filled/PE Sheathed External Telephone Cable

Application

The cable is designed primarily for installing in ducts in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. Various options are available including cable incorporating an aluminium/co-polymer-coated tape applied longitudinally over the paper core wrap acting as a moisture barrier (Compliant with BT Specification CW1179), aerial self supporting cable incorporating a steel support member for use in overhead applications (Compliant with BT Specification CW1252), and galvanised steel wire armoured version suitable for direct burial (Compliant with BT Specification CW1198).

The product is also available with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath. The armour is used as additional protection of telecommunication cables for direct burial.

The jelly filled or air core cable is armoured with a suitable number of galvanised mild steel wires applied directly over the polyethylene sheath of the cable. The wires shall comply with BS EN 10257 Part 1 except that the tensile strength shall be not less than 340 MN/m2 and not greater than 540 MN/ m2. The value of resistivity for the armour is not mandatory.

The post 0.5mm Cu External Filled, SWA Armoured Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179)

PACW/Cellular PE Insulation/PJ Filled/PE Sheathed External Telephone Cable

Application

The cable is designed primarily for installing in ducts in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. Various options are available including cable incorporating an aluminium/co-polymer-coated tape applied longitudinally over the paper core wrap acting as a moisture barrier (Compliant with BT Specification CW1179), aerial self supporting cable incorporating a steel support member for use in overhead applications (Compliant with BT Specification CW1252), and galvanised steel wire armoured version suitable for direct burial (Compliant with BT Specification CW1198).

The product is also available with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath. The armour is used as additional protection of telecommunication cables for direct burial.

The jelly filled or air core cable is armoured with a suitable number of galvanised mild steel wires applied directly over the polyethylene sheath of the cable. The wires shall comply with BS EN 10257 Part 1 except that the tensile strength shall be not less than 340 MN/m2 and not greater than 540 MN/ m2. The value of resistivity for the armour is not mandatory.

The post 0.9mm Cu External Filled, SWA Armoured Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179/CW1198)

PACW/Cell PE Insulation/PJ Filled/Moisture Barrier/PE Sheathed/Steel Wire Armour/PE Oversheath

Application

The cable is designed primarily for direct burial in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. The cable core comprises units of cellular polyethylene insulated twin conductors flooded with petroleum jelly and wrapped with a paper tape. The cable core is then covered with a black polyethylene inner sheath. A layer of galvanised steel armour wires is then applied over the inner sheathed cable, and an outer sheath of PE is applied over the armour wires. Compliant with BT Specification CW1198). The product is also available with a PVC outer sheath in lieu of polyethylene and with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath.

The post 0.5mm Cu External Filled, Screened, SWA Armoured Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BT Specifications CW1128/CW1179/CW1198)

PACW/Cell PE Insulation/PJ Filled/Moisture Barrier/PE Sheathed/Steel Wire Armour/PE Oversheath

Application

The cable is designed primarily for direct burial in the Ò»Æð²Ý ‘DÒ»Æð²Ý ’ or Secondary side of local telecommunications networks. The cable core comprises units of cellular polyethylene insulated twin conductors flooded with petroleum jelly and wrapped with a paper tape. The cable core is then covered with a black polyethylene inner sheath. A layer of galvanised steel armour wires is then applied over the inner sheathed cable, and an outer sheath of PE is applied over the armour wires. Compliant with BT Specification CW1198). The product is also available with a PVC outer sheath in lieu of polyethylene and with filling compound suitable for tropical climates with a drop point greater than 80ºC.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, black low density polyethylene sheath.

The post 0.9mm Cu External Filled, Screened, SWA Armoured Telephone Cable appeared first on Ò»Æð²Ý.

(Complies with BS 6724:2016)

Class 2 Stranded Copper/ XLPE Insulation / Low Smoke Zero Halogen Bedding Layer / Galvanized Steel Wire Armour Wires / Low Smoke Zero Halogen Sheath

Application

Designed for industrial wiring, mains power distribution and associated fixed wiring applications. Suitable for direct burial, installed in ducts or clipped to surface. Indoor and outdoor applications.

The cable is manufactured with a Low Smoke Zero Halogen (LSZH) sheath, making it suitable for installations in public buildings where, in the event of fire, smoke and acid gas evolution would pose a hazard to public life and equipment.

Cable Description

• Class 2 stranded copper conductor,
• Low smoke zero halogen cross linked polyethylene (XLPE) insulation,
• Low smoke zero halogen (LSZH) bedding layer
• Galvanized Steel Wire Armour,
• Low smoke zero halogen (LSZH) outer sheath.

N.B. In the event of fire, the gases evolved from this cable are free from Halogen and the design is optimised to limit the quantity and cleanliness of the smoke evolved during this period. Although the acronym HFFR is applied to the sheath material, the terms LSOH, HFFR and HFFR are also applicable.

Insulation Colours

2 Core – Blue, Brown,
3 Core Ò»Æð²Ý – Brown, Black, Grey
4 Core Ò»Æð²Ý – Blue, Brown, Black, Grey

Sheath Colour

Black

Third party Accreditation

Cables are tested and approved by BASEC (British Approvals Service for Cables)

The post SWA LSZH Multi-Core Cable appeared first on Ò»Æð²Ý.

(Complies with BS 5467:2016)

Class 2 Stranded Copper/ XLPE Insulation / PVC Bedding Layer / Galvanized Steel Wire Armour Wires / PVC Sheath

Application

Designed for industrial wiring, mains power distribution and associated fixed wiring applications. Suitable for direct burial, installed in ducts or clipped to surface. Indoor and outdoor applications.

Cable Description

• Class 2 stranded copper conductor,
• Cross linked polyethylene (XLPE) insulation,
• PVC bedding layer
• Galvanized Steel Wire Armour,
• PVC outer sheath.

Insulation Colours

2 Core – Blue, Brown,
3 Core Ò»Æð²Ý – Brown, Black, Grey
4 Core Ò»Æð²Ý – Blue, Brown, Black, Grey

Sheath Colour

Black

Third party Accreditation

Cables are tested and approved by BASEC (British Approvals Service for Cables)

The post SWA PVC Multi-Core Cable appeared first on Ò»Æð²Ý.