Suitable for Railway Applications

Application

This product is robust PVC insulated tinned copper annealed wire, available as a twisted pair. It is designed primarily for jumpering or hook up on distribution frames within harsh environments, and may also be used as a general equipment wire within cabinets and exchange equipment.

The post Non-Irradiated PVC Jumper Wire appeared first on Ò»Æð²Ý.

(Compliant with NR/L2/SIG/30060 – Network Rail certificate of acceptance PA05/06474)

Application

Signalling in railway networks. Axle counter system for traffic management.

Family

Railway Signalling cables

Design

1. Conductor – Tinned copper wire
2. Insulation – Solid polyethylene
3. Twisting – Construction in pairs. Two pairs cable construction in quads
4. Stranding – Concentric layers
5. Filling Compound – Petroleum jelly compound
6. Core Wrapping – Plastic tape(s) with overlapping
7. Antirodent Protection – Glassfibre tape
8. Moisture Barrier – Aluminiumpolymer laminate tape (incl Drain/continuity wire)
9. Sheath – PE (Polyethylene)

The post PE Axle Counter Cable appeared first on Ò»Æð²Ý.

(Complies with BR1932:1987) Network Rail certificate of acceptance – PA05/06234

Interconnecting Cable for SSI Systems
PACW / PE Insulation / LSZH Inner Sheath (Belt) / Moisture Barrier / LSZH Sheath External Telephone Cable

Application

The cable is designed primarily for external deployment in railway environments as the interconnecting cable for Solid State Interlocking (SSI) Systems. It is manufactured in accordance with Network Rail Specification BR1932 (Dec 1987). The cable is deployed in troughing or by direct burial. In the latter case, the thickness of the outer sheath is increased.

Construction

The cable core comprises two plain annealed copper conductors, insulated with solid polyethylene and forming a twisted pair with regular lay. The cable core is then covered with a polyester core wrap and a LSZH inner sheath or bedding. A polymer-coated aluminium tape is applied longitudinally over the cable core wrap acting as a moisture barrier. The moisture barrier is bonded to the LSZH outer sheath.

The post Twin Datalink LSZH Cable appeared first on Ò»Æð²Ý.

(Complies with BR1932:1987) Network Rail certificate of acceptance – PA05/06234

Interconnecting Cable for SSI Systems
PACW / PE Insulation / PE Inner Sheath (Belt) / Moisture Barrier / PE Sheath External Telephone Cable

Application

The cable is designed primarily for external deployment in railway environments as the interconnecting cable for Solid State Interlocking (SSI) Systems. It is manufactured in accordance with Network Rail
Specification BR1932 (Dec 1987). The cable is deployed in troughing or by direct burial. In the latter case, the thickness of the outer sheath is increased.

Construction

The cable core comprises two plain annealed copper conductors, insulated with solid polyethylene and forming a twisted pair with regular lay. The cable core is then covered with a polyester core wrap and a polyethylene inner sheath or bedding. A polymer-coated aluminium tape is applied longitudinally over the cable core wrap acting as a moisture barrier. The moisture barrier is bonded to the polyethylene outer sheath.

A second variant includes a 5 mm outer polyethylene sheath to facilitate direct burial.

Further variants are available including HFFR Sheath and Rodent Resistant outer sheath incorporating a corrugated steel tape bonded to a polymeric sheath.

The post Twin Datalink PE Cable appeared first on Ò»Æð²Ý.

(Complies with Specifications NR/PS/TEL/00015 and BR1916/T1822) Network Rail certificate of acceptance – PA05/06233

PACW / Solid polyethylene insulation / moisture barrier / HFFR Sheath External Telephone Cable – suitable for tunnel and sub-surface applications

Application

The cable is designed primarily for underground track-side railway installation. It is suitable for installation in ducts and on cable trays in tunnel wall. It is a twisted pair cable with Moisture barrier bonded to an inner HFFR Sheath. The cable is protected against crushing and rodent attack by the inclusion of a corrugates steel tape armour bonded to the outer HFFR sheath. The product satisfies the requirements of Network Rail Specification NR/PS/TEL/00015 (formerly TR/E/PS/00015 & BR1916/BR1822)

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Cable Description

• Plain annealed solid copper wire
• Solid polyethylene insulation
• Twisted pairs
• Barrier tapes
• Black HFFR thermoplastic sheath incorporating a longitudinally applied aluminium/polyethylene moisture barrier, and corrugated steel tape armour bonded to a HFFR thermoplastic sheath

The post Duct Copper Trackside LSZH Cable appeared first on Ò»Æð²Ý.

(Complies with Specifications NR/PS/TEL/00015 and TS0886). Network Rail certificate of acceptance – PA05/06233

PACW / Solid polyethylene insulation / PJ filled / Moisture barrier / Polyethylene sheathed External Telephone Cable

Application

The cable is designed primarily for track-side railway installation in troughing. It is a petroleum jelly filled, twisted pair cable suitable for duct installation with a bonded moisture barrier block polyethylene sheath. It is available for direct buried or open channel installation with an additional protection of a bonded corrugated steel tape and sheath. The additional protection provides protection against rodent attack. The product satisfies the requirements of Network Rail Specification NR/PS/TEL/00015 (formerly GK/RT 0315) and Specifications TS0886 and BR1822 when armoured.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Cable Description

• Plain annealed solid copper wire
• Solid polyethylene insulation
• Twisted pairs
• Petroleum jelly filling
• Water swellable tape
• Paper core wrap
• Black polyethylene sheath incorporating a longitudinally applied aluminium/polyethylene moisture barrier

The post Duct Copper Trackside PE Cable appeared first on Ò»Æð²Ý.

(Complies with Specifications NR/PS/TEL/00015 and BR1916/T1822) Network Rail certificate of acceptance – PA05/06233

PACW / Solid polyethylene insulation / Moisture barrier / HFFR sheath / Bonded steel tape / HFFR Sheath External Telephone Cable – suitable for tunnel and sub-surface applications

Application

The cable is designed primarily for underground track-side railway installation. It is suitable for installation in ducts and on cable trays in tunnel wall. It is a twisted pair cable with Moisture barrier bonded to an inner HFFR Sheath. The cable is protected against crushing and rodent attack by the inclusion of a corrugates steel tape armour bonded to the outer HFFR sheath. The product satisfies the requirements of Network Rail Specification NR/PS/TEL/00015 (formerly TR/E/PS/00015 & BR1916/BR1822)

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Cable Description

• Plain annealed solid copper wire
• Solid polyethylene insulation
• Twisted pairs
• Barrier tapes
• Black polyethylene sheath incorporating a longitudinally applied aluminium/polyethylene moisture barrier, and corrugated steel tape armour bonded to a HFFR thermoplastic sheath

The post Armoured Copper Trackside LSZH Cable appeared first on Ò»Æð²Ý.

(Complies with Specifications NR/PS/TEL/00015 and TS0886/T1822) Network Rail certificate of acceptance – PA05/06233

PACW / Solid polyethylene insulation / Moisture barrier / PJ filled / Polyethylene sheathed External Telephone Cable

Application

The cable is designed primarily for track-side railway installation. It is a petroleum jelly filled, twisted pair cable suitable for duct installation with a bonded moisture barrier sheath, and for buried or open channel installation, with an additional protection of a bonded corrugated steel tape and sheath. The additional protection provides protection against rodent attack. The product satisfies the requirements of Network Rail Specification NR/PS/TEL/00015 (formerly GK/RT 0315) and Specifications TS0886 and BR1822.

Construction

Twisted pairs in 10 Pair Units. The pair range is 2 Ò»Æð²Ý – 100.

Cable Description

• Plain annealed solid copper wire
• Solid polyethylene insulation
• Twisted pairs
• Petroleum jelly filling
• Water swellable tape
• Paper core wrap
• Black polyethylene sheath incorporating a longitudinally applied aluminium/polyethylene moisture barrier, and corrugated steel tape armour bonded to a black polyethylene sheath

The post Armoured Copper Trackside PE Cable appeared first on Ò»Æð²Ý.

(Compliant with NR/L2/SIG/30060 – Network Rail certificate of acceptance PA05/06474)

Application

Signalling in railway networks. Axle counter system for traffic management.

Family

Railway Signalling cables

Design

1. Conductor – Tinned copper wire
2. Insulation – Solid polyethylene
3. Twisting – Construction in pairs. Two pairs cable construction in quads
4. Stranding – Concentric layers
5. Core Wrapping – Plastic tape(s) with overlapping
6. Antirodent Protection – Glassfibre tape
7. Moisture Barrier – Aluminiumpolymer laminate tape (incl Drain/continuity wire)
8. Sheath – ZHL5 Compound

Standards: NR/L2/SIG/30060 (March 2009)

Fire Performance: Only HFFR Versions

• Flame Propagation IEC 60332-3
• Halogen Free IEC 60754
• Flame Retardant IEC 60332-1
• Smoke Emission IEC 61034

The post HFFR Axle Counter Cable appeared first on Ò»Æð²Ý.